-
Water Spray And Rotary Retort
The water spray rotary sterilization retort uses the rotation of the rotating body to make the contents flow in the package. Heat up and cool down by the heat exchanger, so the steam and cooling water will not contaminate the product, and no water treatment chemicals are needed. The process water is sprayed onto the product through the water pump and the nozzles distributed in the retort to achieve the purpose of sterilization. Accurate temperature and pressure control can be suitable for a variety of packaged products. -
Water Immersion And Rotary Retort
Water immersion rotary retort uses the rotation of the rotating body to make the contents flow in the package, meanwhile drive the process water to improve the uniformity of the temperature in the retort. Hot water is prepared in advance in the hot water tank to start the sterilization process at high temperature and achieve the fast temperature rising, after sterilization, hot water is recycled and pumped back to hot water tank to achieve the purpose of energy saving. -
Steam And Rotary Retort
Steam and rotary retort is to use the rotation of the rotating body to make the contents flow in the package. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation. -
Retort Energy Recovery
If your retort emits steam into the atmosphere, the DTS steam autoclave energy recovery system will convert this unused energy into usable hot water without affecting the FDA/USDA heat treatment exhaust requirements. This sustainable solution can save a lot of energy and help protect the environment by reducing factory emissions. -
Full Spray Special Sterilization Basket
Dedicated basket for water spray retort suitable for water spray retort, mainly used for bottles, cans packages. -
Top Shower Dedicated Sterilization Basket
Dedicated basket for water cascade retort suitable for water cascade retort, mainly used for bottles, cans packages. -
Rotating Special Sterilization Basket
Dedicated basket for water cascade retort suitable for water cascade retort, mainly used for bottles, cans packages. -
Trolley
Trolley is used to turn over the loaded trays on the ground, based on retort and tray size, trolley size shall match up with them. -
Pilot Retort
The pilot retort is a multifunctional test sterilization retort, which can realize sterilization methods such as spray (water spray, cascade, side spray), water immersion, steam, rotation, etc. It can also have any combination of multiple sterilization methods to be suitable for food manufacturers' new product development laboratories, formulating sterilization processes for new products, measuring FO value, and simulating the sterilization environment in actual production. -
Direct Steam Retort
The Saturated Steam Retort is the oldest method of in-container sterilization used by human. For tin can sterilization, it’s the simplest and most reliable type of retort. It is inherent in the process that all air be evacuated from the retort by flooding the vessel with steam and allowing the air to escape through vent valves.There is no overpressure during the sterilization phases of this process, since air is not permitted to enter the vessel at any time during any sterilization step. However, there may be air-overpressure applied during the cooling steps to prevent container deformation. -
Automated Batch Retort System
The trend in food processing is to move away from small retort vessels to larger shells to improve efficiency and product safety. Larger vessels imply larger baskets that can’t be handled manually. Large baskets are simply too bulky and too heavy for one person to move around.